Tag Archives: Rifle

Scoop: New Hornady A-Tip MATCH Bullets! Part 1

Witness the creation of the ultimate low-drag, high performance match bullet!

Hornady A-Tip Bullets Now At Midsouth Shooters!

After weeks of teasers, we’re finally able to talk about the new projectile from the folks at Hornady. We actually got to visit Grand Island, Nebraska to tour the facility, and get a first-hand look at the new milled aluminum tipped bullets. This thing is beautiful!

“New to Midsouth Shooters and Hornady, the A-Tip MATCH bullets are the latest and greatest from the Hornady Ballistic Development Group! After years of research, testing, and a new advanced manufacturing process with state-of-the-art quality control measures, Hornady has created an all new Aluminum Tipped projectile. This precision machined tip is longer than polymer tips which moves the center of gravity, thus enhancing inflight stability. The aeroballistically advanced tip design results in tighter groups, and reduced drag variability.”

By using some of the most sophisticated tools in projectile development, Hornady created a bullet with a milled tip, 99% repeatable, and a Doppler Radar verified low-drag coefficient (super-high Ballistic Coefficient) with a winning blend of ogive, tip length, bearing surface, and optimized boat-tail within each caliber.

“We wanted to incorporate aluminum tips in a full line of match bullets for years because we can make longer tips than we can with polymer materials,” said Joe Thielen, Assistant Director of Engineering. “This longer tip is a key component that helps move the center of gravity of the bullet rearward, thus enhancing in-flight stability and reducing dispersion. The problem has always been the cost to produce a tip like this, but we’ve developed a cost-effective process for manufacturing these aluminum tips while staying affordable for serious match shooters. The longer aluminum tips are machined to be caliber-specific, and when coupled with highly refined AMP® bullet jackets, aggressive profiles and optimized boattails, the result is enhanced drag efficiency (high BC) across the board. Each bullet design is carefully crafted for minimal drag variability for the utmost in shot-to-shot consistent downrange accuracy.The materials, design and manufacturing techniques combine for the most consistent and accurate match bullets available.”

– Hornady

Right off the press, the projectiles are sequentially packed, for ultimate consistent performance, from lot to lot, ensuring your projectiles are truly YOURS every step of the way. Think of it like shooting clones of your load every time (100 in each box)! Minimal handling throughout the process means there’s less of a chance of YOUR bullet being marred, scuffed, or altered, which is why each box is packaged with a Polishing Bag for you to give the final buff to your beautiful new projectiles!

Hornady A-Tip MATCH Bullets:

6MM 110gr Hornady A-Tip6.5MM 135gr Hornady A-Tip 6.5MM 153gr Hornady A-Tip  30CAL 230gr Hornady A-Tip 30CAL 250gr Hornady A-Tip

Part 2 is forthcoming, with more in-depth analysis from Hornady’s lead technicians. Get ready for graphs, charts, and more! To read the press release, CLICK HERE!

O Canada! Sniper Gains World Record

A Canadian Special Forces [sic] sniper looks to have taken out an ISIS fighter from a world-record distance of 11,316 feet, or about 2.2 miles away.

Now, as shooters and reloaders, we know there are a myriad of details which went into making a shot like this successful. “The spotter would have had to successfully calculate five factors: distance, wind, atmospheric conditions and the speed of the earth’s rotation at their latitude,” Says Ryan Cleckner, a former U.S. Army Ranger who served several tours in Afghanistan, and wrote the “Long Range Shooting Handbook.”

Atmospheric conditions also would have posed a huge challenge for the spotter.

Cleckner says, “To get the atmospheric conditions just right, the spotter would have had to understand the temperature, humidity and barometric pressure of the air the round had to travel through.”

BUT WHAT ABOUT THE HARDWARE???

“While the ammunition that Canadian special forces use in the TAC-50 is “off-the-charts powerful,” with some 13,000 foot-pounds of force when it comes out of the muzzle, the speed of a bullet, a 750-grain Hornady round, is not as important as the aerodynamic efficiency of the bullet.”

Yes. You read it correctly. The rifle is great, the spotter was spot-on, the shooter held to his technique.

One of the largest factors was the bullet. A HORNADY bullet.

This Hornady.

“The key to having a sniper round travel that far and hit a small target has less to do with speed and more to do with the efficiency with which the projectile moves through the air,” he said.

“That’s because while sniper bullets exit the muzzle at several times the speed of sound they eventually slow down to less than the speed of sound, and at that point they become less stable. An efficiently designed bullet reduces that instability, he explained,” Says Michael Obel of Fox News.

“When it all comes together, it’s ‘mission accomplished’.”

Well done, soldier! We appreciate you essentially disrupting a deadly operation about to take place in Iraq by these barbarians.

We have to ask! What’s your longest shot?

Wanna start shooting like this warrior? We have a few boxes left of the legendary bullet . Click Here to stock up!

Step-By-Step Del-Ton AR-15 Kit Build Video

By Ultimate Reloader:

Gavin at Ultimate Reloader shows you how easy it is to build an AR-15

Are you like me? Do you have a few spare AR-15 stripped lower receivers laying around that need rifles built from them? Now is a *great* time to build an AR-15 because component prices are low, and kits/parts are in stock! For years I’ve been wondering about Del-Ton kits, and I’d like to share with you my experiences building out an AR-15 rifle from one of Del-Ton’s kits!

Here’s a complete walk-through of my rifle build, complete with a quick range trip: (condensed build steps are just 7 minutes long!)

For a more in-depth look at the article, plus more of Gavin’s review, Click Here, and visit the Ultimate Reloader site!

Here are the complete specifications for this rifle: Del-Ton RKT100 from Midsouth Shooters Supply

For a look at the complete AR Build page at Midsouth Shooters Supply, Click Here!

I’m really liking this rifle, but I do have some upgrades planned, so stay tuned! Have you built a Del-Ton AR-15 rifle kit? I’d love to hear your experiences!

Thanks,
Gavin

 

The Bullet-Cam, a Whole New Perspective in Shooting

Just watch the video below. Turn on the sound, and gape in amazement at what technology has brought forth.

Now, how do you feel about this advancement? What questions do you have for Hornady or Vortex? How will the VIP Warranty work for an optic which is strapped to the end of a tiny missile?

Comments on their respective social media platforms field many of these mind boggling questions. Apparently, the warranty expires once the bullet leaves the barrel. The camera is suspended in a gel similar to that of the human eye. The camera is powered by positive thinking, just like Tony Robbins. Most importantly, you can live stream to Facebook, because Facebook would LOVE this…Right?

This is truly one of my favorite days every year. I’m a self proclaimed gullible goof, so this one got me right in the gut. I literally turned to one of our purchasers and exclaimed, “Why are these not on the website yet???” Needless to say, I’ve earned a new nickname around the office…

Thanks Hornady, and Vortex for playing along. I’m off to track down the Boggy Creek Monster on the back of a unicorn.

Ultimate Reloader: New 6.5 Creedmoor Ammunition from Norma

Gavin Gear, Ultimate Reloader:

Norma is known for their high quality brass and ammunition, I’ve used Norma brass for precision reloading in calibers like .30-06 with great results. Recently, I saw that Norma had announced a new addition to their Professional Hunter lineup of ammunition: in 6.5 Creedmoor! I thought I should try some out with the Ruger Precision Rifle, and that’s what I’ll cover in this post.

As you saw in the video, this ammunition behaves more like match ammunition than it does hunting ammunition- I really wish it was deer season! Here’s the chronograph results:

With an SD of 13.7 FPS, this ammunition is very consistent in terms of velocity. It’s not surprising that the first four shots went into a .5″ group. This new ammunition is built around the Swift Scirocco II 6.5mm Bullet, and here’s more info about this precision-oriented hunting projectile:

Technical Information

  • Caliber: 264, 6.5mm
  • Bullet Diameter: 0.264
  • Bullet Weight: 130 Grains
  • Bullet Length: 1.350″
  • Bullet Style: Polymer Tip Spitzer Boat Tail
  • Bullet Coating: Non-Coated

Ballistics Information:

  • Sectional Density: .266
  • Ballistic Coefficient:.571

This is certainly a great choice of ammunition if you are hunting medium game with a rifle chambered in 6.5 Creedmoor. I do hope to show more 6.5 Creedmoor rifles here on Ultimate Reloader chambered in 6.5 Creedmoor- stay tuned!

It’s always good to feel the sharp recoil of the Ruger Precision Rifle against my shoulder, and to smell the burnt gunpowder in the air. Can’t wait to sit down again with this ammunition to see if I can get that 3/8″ 5-shot group I know this ammo is capable of! If you are looking for this new 6.5 Creedmoor Professional Hunter ammunition, Midsouth Shooters Supply has it!

Have you been shooting Norma Professional Hunter ammunition? If so, please share your experiences!

Thanks,
Gavin

Check out the Ultimate Reloader site HERE for more reviews, how-to’s, and much more!

Giving Guns as Gifts: Doing It Right

A Christmas story with AR 15

If you plan to make a gift of a firearm to a family member, close friend, or relative this season, there are right ways to do that — and some very wrong ways to transfer firearms to loved ones, say Texas & U.S. Law Shield Independent Program Attorneys.

Ownership of a firearm has serious legal implications that other consumer products don’t. So let’s look at some questions you may have about giving a firearm as a gift this holiday season.

Gift Certificates Make the Process Simple

Texas Law Shield Independent Program Attorney Emily Taylor said, “The ATF recommends that if you want to give someone a new firearm, rather than going to a gun store, buying it, and giving it to someone, purchasing a gift certificate from a retailer and giving that as the present makes the process easy.”

“That way,” she said, “the recipient will get the exact gun he or she wants, and there’s no question about who is ‘the actual buyer of the firearm,’ which is a question any purchaser must certify on the Federal Form 4473 at the time of purchase.”

1: Can the Recipient Legally Own a Firearm?

If you decide to go ahead with giving a gun directly to the recipient, you must find out if the intended recipient can legally own a firearm where he or she lives.

“There are more than 20,000 different gun laws on the books, so the kinds of firearms that law-abiding citizens can own vary quite a lot,” said Taylor. Also, she reminded gun givers of a big restriction that many people overlook: Juveniles under the age of 18 generally may not possess a handgun.

Check out the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) website for more details.

army santa

2: Know the Recipient Very Well

Taylor pointed out that gift givers must not ever transfer a firearm to someone they know legally can’t own one. That’s a federal felony, so if your sketchy brother-in-law may be disqualified from owning firearms, don’t take the chance. It’s also worth pointing out that if you even have reasonable cause to believe the recipient can’t legally own a firearm, that’s enough to get the giver prosecuted under the law.

3: In-State Transfers Are Easier

There’s no federal law that prohibits a gift of a firearm to a relative or friend that lives in your home state. Abramski v. United States, a recent Supreme Court decision involving a “straw purchase” of a firearm, did not change the law regarding firearms as gifts.

According to the National Shooting Sports Foundation, there are a handful of states that currently require in-state firearm transfers to run through a local firearms retailer. This ensures an instant background check will be performed to make sure the recipient is not legally prohibited from owning the gun. This is the law in California, Colorado, Connecticut, Delaware, New York, Oregon, Rhode Island, and Washington State. Also, the District of Columbia Maryland and Pennsylvania require a background check for private-party transfer of a handgun.

Taylor said, “There are exceptions, so it’s important to carefully check the law of your state, ask your local firearms retailer, or call Independent Program Attorneys in these states to get clarifications on the law.”

4: Getting the Gift There

If you would like to gift a firearm to someone in another state, you may not simply ship handguns or long guns to that person. If you would like to transfer a gun to an individual in another state, this must be accomplished by using Federal Firearms License Dealers as an intermediary between the individual parties.

Carriers vary in the types of firearms they are willing to transport, and in the specific rules they impose. Taylor added, “With all carriers, federal law requires you to declare that your package contains an unloaded firearm. To be safe, always consult your carrier in advance about its regulations for shipping firearms.”

5: Family Transfers of Meaningful Firearms

During the holiday season, many families want to pass down meaningful firearms to the next generation. What if you want to give a family firearm to your son or daughter?

firearm family

Of course you can, Taylor said, but she points out that some states require even inter-family transfers to go through a licensed retailer.

“It’s worth emphasizing,” Taylor said, “that you can never transfer a firearm directly to another person who is a resident of a different state. In that case, you must transfer the firearm through a licensed retailer in the state where the person receiving the gift resides.”

If you do it right, giving someone a hunting rifle, a waterfowling shotgun, a plinking handgun, or many other types of firearms can be rewarding gifts. Just keep in mind there are right ways to make the exchange, and wrong ways. It’s better to know the law and follow it closely so the gift-giving is above board and completely legal. — Texas & U.S. Law Shield Staff

 Emily Taylor is an Independent Program Attorney at Walker & Byington

The Marksman: MEC’s New Metallic Reloading Press

UPDATE: New Info added about the self-centering shell holder, and new pictures added, as well! Read more below:

MEC ReloadingFor decades, MEC Reloading has been THE go-to reloading press for shotshell reloaders around the world. Recently, we heard tale of MEC building their first offerings in a series of metallic reloading tools. Enter the MEC Marksman, a heavy duty, single stage press attempts to set itself apart from the heard with their sights set on quality, and precision.

Check out the press (pun) release below!

Official Press Release: 11/1/2016

MEC Shooting Sports is pleased to introduce its latest new product offering, the all new MEC Marksman™ to the metallic reloading enthusiast. As an industry-leading manufacturer of shotshell reloading equipment and clay target machines, MEC brings its knowledge and expertise to the metallic reloading marketplace. The MEC Marksman™ single stage metallic reloader and accessory products are made in the USA in Mayville, WI.

The MEC Marksman™ is made from ductile cast iron for superior quality and durability. Our patent-pending self-centering shell The MEC Marksmanholder provides metallic reloading users greater accuracy and consistency to every load compared to competing models. The MEC Marksman™ is compatible with all 7/8-14 thread dies to change calibers quickly. Reload .22 Hornet to .416 Rigby all with one convenient machine.

In addition to the MEC Marksman™, the Metallic line will include reloading accessories and essentials. Powder measure, powder trickler, scale and calipers are available to complete the MEC Marksman™ reloading experience. An additional base is available for easy installation and is compatible with the MEC Jig Fixture mounting system. Case prep tools and components are also available.

With over 60 years of shooting sports experience, the addition of the MEC Marksman™ continues the reloading heritage from the brand you trust.


So, what does this mean to us here at Midsouth Shooters? Quite a MEC Marksman Schematics bit, actually. We’re excited to welcome another offering to our customers, who will undoubtedly put this press to the test. There are truly no better product testers in the world, than our reloading community. We look forward to hearing from you, but for now, we have to settle for the early reports from bloggers, as well as a few early adopters, who’re giving the Marksman rave reviews.

The MEC Marksman, as well as other essential reloading accessories from MEC are available Here, and Here! If you’re looking to get into shotshell reloading, we know MEC presses are some of the best on the market, and we gladly offer them Here.

Fun Fact: MEC stands for Mayville Engineering Company

UPDATED ITEMS:

When we looked a little further into the self-centering shell holder, MEC Marksman self-centering shell holderfor which MEC has sought out a patent, we find we’ve covered such an idea from our own Glen Zediker. You can find the article on “Float” by clicking here. Ultimately, what they’re trying to accomplish, and reduce is bullet run-out, as well as maintaining the best concentricity possible during the ammo creation process.

a closer look at the self-centering shell holder on the marksman

self centering shell holder with cartridge brass

How many of you have tried MEC reloading presses before? What’s your take on the new metallic reloading offerings from MEC? Will you be pulling the handle of the Marksman?