This is a great all-around revolver for personal defense and field use — and also a fun gun to spend a day at the range with! READ MORE
I have used Charter Arms revolvers for more than 40 years. Charter was introduced in the 1960s and armed many Americans at a time when truly good affordable guns were scarce. The Charter Arms design features a transfer bar ignition for safety, among the first revolvers to do so. The frame is steel also it is enclosed by aluminum to save weight. The revolvers have always been available with well designed grips. The sights are wide and easily picked up quickly. Quite simply you get your money’s worth with the Charter Arms, and perhaps then some. The Charter Arms .44 Special Bulldog is the most famous product but revolvers in .22 Long Rifle, .22 Magnum, .32 Smith and Wesson Long, .38 Special, .357 Magnum and perhaps a few others have been offered. The revolver illustrated is among the most interesting.
The Charter Arms Professional is a small frame revolver with a 3-inch barrel, hand filling grips, a double action/single action mechanism, good sights, and a nice finish. Open the cylinder by pushing the cylinder release forward and you will see a 7-shot cylinder chambered in .32 H&R Magnum. The pistol uses the classic Charter Arms steel frame but the finish is a modern black nitride. I cannot see any problem with the durability of this finish. The rear sight is wide and broad like all Charter Arms revolvers while the front sight is a fiber optic insert. This green insert is high visibility and easily acquired for speed shooting. Despite the light twenty two ounce weight the Charter Arms Professional has proven a light kicker with standard loads. The action is as smooth as any modern production double action revolver. In single action mode the trigger breaks at 4.5 pounds. I like the revolver a lot and after firing more than four hundred cartridges I have formed a good opinion of the revolver.
My primarily loading has been the Black Hills Ammunition cowboy load, a lead bullet with modest recoil and good accuracy. I have also used the 85 grain JHP at 1055 fps. The revolver is very easy to use well and to fire quickly. A trained shooter will find a neat group of cartridges on the target, well centered at 7 yards. The revolver tended to fire slightly low. I accommodated this by holding the front optic sight slightly higher than the rear sight, resulting in the bullets homing in on target. The revolver is more than accurate enough for filed and camp use, exhibiting five shot groups of 2-2.5 inches on paper at 15 yards when carefully bench-rested. Frankly I went overboard on both time and ammunition budget goals with this revolver. It is simply a fun gun to shoot. As for a comparison to .38 Special recoil, the .32 Magnum kicks much less than the .38 Special. I can place seven .32 Magnums into a man sized target in the same time, approximately, I can place five .38s into the target. The .32 H and R Magnum isnt as powerful as the .38 Special but then accuracy can often make up for power. The reverse is seldom true. The .32 H and R Magnum offers reasonable power for the light recoil. As an example the Hornady Critical defense at 1040 fps penetrated well past twelve inches in testing and expanded well.
It is difficult to separate the cartridge from the handgun and a look at the .32 Magnum is wise. The .32 Magnum it seems was originally intended as a crackerjack field round. For small game the .32 is a hand loaders dream- economical, accurate, and effective on small game. For personal defense it is more problematical. As we grow older we are more sensitive to recoil, the skin is thinner, and the joints ache. A .38 Special revolver, particularly a lightweight version, stings and may just be too much for many shooters. The .32 Magnum is a reasonable alternative. Most 85 grain jacketed hollow point loads will clock 1000 to 1100 fps from the Charter Arms Professional’s three inch barrel. This is approximately .380 ACP class, perhaps a bit more energy, but less expanded diameter. The .32 revolver with standard loads offers light recoil. It is a trade off but a reasonable one. The .32 Smith & Wesson Long, as an example, pushes a 98 grain RNL bullet to a miserable 690 fps!
I liked the revolver enough to experiment with a couple of loads from Buffalo Bore. We are introducing extra recoil into a package that was designed to offer lighter recoil, but we are also increasing wound potential substantially. If carrying the revolver for defense against feral dogs or the big cats the Buffalo Bore loads change the equation. The 100 grain JHP is surprisingly fast — 1220 fps. The point of impact is raised and the revolver is dead on the money at 15 yards. This load is closer to the .38 Special in recoil but offers excellent penetration and expansion. The 130 grain flat point hard cast load breaks 1190 fps. This is a stout load that sometimes offers sticky extraction and should be used sparingly. Recoil is there with this load. Buffalo Bore designed this loading to penetrate the skull of a bear in a last ditch effort to save your life. It will penetrate forty inches of gelatin or more. These loads offer another option in the field for those wanting a lightweight but credible protection handgun.
Loaded with standard loads seniors or inexperienced shooters have a revolver they can use well. Accuracy can make up for power, the reverse is seldom true, and the Charter Arms Professional .32 H&R Magnum has plenty of power and accuracy.
Read more HERE